Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in Hollywood?
Chimney liner work in Hollywood typically runs $2,400 to $6,800 when a full stainless flexible liner is installed, while a HeatShield ceramic resurfacing job that restores a damaged but structurally sound flue usually falls between $1,200 and $2,600. Rebuilds, which involve replacing brick and mortar above the roofline, are the most expensive category and generally start around $3,800 and climb past $12,000 for a full-height stack. These are estimated ranges for the Hollywood market in 2026; your written estimate sets the final price.
We’re a chimney specialist, not a handyman outfit that adds chimneys to a longer list. That matters on a pricing page, because the number you see depends heavily on which materials go into your flue and whether the technician diagnosing it knows the difference between a flue that needs resurfacing and one that needs a full reline. We name the brands we use – DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield – because the materials matter as much as the labor. Our technicians have up to 8 years of experience, and we handle sweeping, inspection, and repair under one company. Call (833) 974-6567 for a free estimate.
Key Takeaways
- HeatShield resurfacing costs roughly half of a full liner replacement and works when the flue is cracked but still structurally intact.
- DuraFlex flexible liners handle offset and older flue configurations that rigid pipe can’t navigate, which widens who can be helped and narrows what it costs to do it right.
- Rebuild pricing is driven by height above the roofline, access, and how much brick and mortar has to come down.
- A missing or failing cap is the usual root of water damage in Hollywood homes, and a new Gelco or Famco cap is a small line item next to the repair it prevents.
- Every estimate is free and every inspection is documented in writing, which matters at insurance renewal and at a home sale.
Chimney Liner & Rebuild Cost Breakdown (2026)
Below are typical 2026 price ranges for the liner and rebuild work we see most in Hollywood. Treat each figure as an estimate band, not a quote. Two houses on the same block can land at different points on the range once the flue is actually opened and inspected.
| Line Item | Typical Range | What It Covers |
|---|---|---|
| Level 1 inspection and written report | $150 – $300 | Visual check of accessible flue, firebox, and cap, documented in writing |
| Level 2 inspection (camera) | $300 – $550 | Video scan of the full flue interior, standard before any reline or sale |
| Chimney sweep | $180 – $350 | Removal of creosote and debris from flue and firebox |
| HeatShield ceramic resurfacing | $1,200 – $2,600 | Restores a cracked but structurally sound clay flue without a full reline |
| DuraFlex flexible stainless liner – single story | $2,400 – $4,200 | New liner, insulation, top plate, and connection |
| DuraFlex flexible stainless liner – two story or offset flue | $3,800 – $6,800 | Same scope, longer run or offset configuration |
| Chimney cap (Gelco or Famco) | $250 – $650 | Moisture and animal exclusion at the crown |
| Crown repair | $350 – $900 | Sealing or rebuilding the concrete crown at the top of the stack |
| Partial rebuild (upper stack) | $3,800 – $7,500 | Replacing deteriorated brick and mortar above the roofline |
| Full rebuild | $8,000 – $12,000+ | Rebuilding the stack top to bottom, including flashing tie-in |
What pushes a job toward the top of its band? Height above the roofline is the single biggest factor in rebuild pricing, because scaffolding and access eat labor hours fast. Flue configuration matters just as much on the liner side: a straight, single-story flue is the easiest reline there is, while an offset flue in an older home takes more time and a flexible system like DuraFlex rather than rigid pipe. The condition of the flue interior after sweeping decides whether you’re looking at resurfacing money or replacement money. And whether a cap already exists changes the scope, since a missing cap usually means water has been getting in for a while.
What Affects Chimney Liner & Rebuild Pricing in Hollywood
Hollywood’s climate shapes chimney costs in ways a national pricing chart won’t tell you. Winters are mild, so the fireplace gets used in shorter bursts rather than through a long heating season – which changes the creosote pattern technicians find inside the flue. A fire that gets lit occasionally and burned hot tends to leave different deposits than one that runs low and slow every night for months. We see plenty of both here, and the sweep and inspection line items above shift with it.
- Flue condition after sweeping. A flue with hairline cracks in the clay tile but sound structure is a HeatShield candidate. A flue with missing tile, gaps at the joints, or a collapsed section needs a full liner. That single determination moves the estimate by thousands, and it’s why we inspect before we quote.
- Flue geometry. Offset flues, older masonry chimneys, and chimneys that served a converted appliance all favor a flexible DuraFlex system. Rigid liners can’t make the turns. If a contractor quotes you a rigid liner price on an offset flue, the job is being priced wrong.
- Height and access. Rebuild pricing in Hollywood tracks how high the stack rises above the roofline and how easy it is to reach. A single-story stack with clear access prices very differently from a tall stack hemmed in by roof geometry.
- Moisture damage already in progress. A missing cap lets rain straight into the flue. By the time a homeowner notices staining on the firebox or a musty smell, the crown or the mortar joints are usually involved too. Gelco and Famco caps close that gap, but if water has been entering for several seasons, the repair line grows.
- Appliance type. A wood-burning fireplace, a gas insert, and a wood stove each need a liner sized and rated for that appliance. Getting the sizing right the first time is what keeps you from paying for the job twice.
- Documentation needs. If you’re selling the home, renewing insurance, or filing a warranty claim, a Level 2 camera inspection with a written report is part of the cost. It’s a modest line item that prevents surprises later.
One more thing worth saying plainly: liner and rebuild work involves the flue, the crown, and the chimney structure at height. This isn’t a job for a homeowner with a ladder and a tube of sealant. A trained professional should handle anything involving the flue interior or work above the roofline, and we’d rather tell you that than sell you a shortcut.
How to Save on Chimney Liner & Rebuild
The biggest savings on liner work come from catching the problem before it becomes a rebuild. A $250 to $650 cap installed today is the cheapest insurance against the $350 to $900 crown repair and the water damage that follows a missing one. If you’ve been putting off a cap, that’s the line item to fix first.
Second, get the inspection before you accept any replacement quote. HeatShield resurfacing can save you the cost of a full reline – we’ll tell you honestly which one you actually need. Plenty of flues that get quoted for a full liner are good candidates for ceramic resurfacing at roughly half the price. The only way to know is a proper inspection with a camera.
Third, bundle the sweep and the inspection. If you’re booking a sweep anyway, the inspection adds little to the total and gives you a written record of the flue’s condition. That record has real value at insurance renewal, at a home sale, and if you ever need to make a warranty claim. We document every inspection in writing so you have something to show your insurer, your buyer, or yourself.
Fourth, don’t wait for the failure. A flue that’s relined or resurfaced on your schedule costs less than one that fails and forces a rebuild on the chimney’s schedule. If you’re heading into burning season, book the inspection now rather than after the first cold snap. Estimates are free, so there’s no cost to finding out where you stand: call (833) 974-6567.
FAQs – Chimney Liner & Rebuild Cost
How much does a chimney liner cost in Hollywood?
A full stainless flexible liner in Hollywood typically runs $2,400 to $4,200 for a single-story straight flue and $3,800 to $6,800 for a two-story or offset configuration. The range reflects liner length, flue geometry, insulation, and the top plate and connection work. Call (833) 974-6567 for an exact quote – estimates are free.
Is HeatShield resurfacing cheaper than a full liner replacement?
Yes, usually by about half. HeatShield ceramic resurfacing runs $1,200 to $2,600 versus $2,400 to $6,800 for a full DuraFlex reline. It’s the right call when the flue is cracked but structurally sound; it’s the wrong call when tiles are missing or the flue has collapsed. An inspection tells you which you’re facing, and we’ll tell you honestly which one you actually need. Call (833) 974-6567 to book one.
How much does a chimney rebuild cost in Hollywood?
A partial rebuild of the upper stack runs $3,800 to $7,500, and a full rebuild runs $8,000 to $12,000 or more. Height above the roofline, access, and how much deteriorated brick has to come down drive the number. Call (833) 974-6567 for a written estimate on your stack.
Can I just cap the chimney instead of rebuilding it?
Sometimes, yes. A Gelco or Famco cap costs $250 to $650 and stops water and animals from getting in, which halts the most common cause of chimney deterioration. But a cap won’t fix mortar that’s already failed or a crown that’s already cracked. If the structure is sound, the cap is the smart spend. If it isn’t, the cap buys time but not a solution. Call (833) 974-6567 and we’ll tell you which situation you’re in.
Why is my liner quote higher than a neighbor’s?
Because the flues aren’t the same. A straight single-story flue relines for close to $2,400; an offset two-story flue with a failed crown can push past $6,800 once the liner and crown work are combined. Comparing quotes without comparing scope is how homeowners end up overpaying or under-buying. We put the scope in writing so the comparison is real. Call (833) 974-6567 for a free estimate.
Do I need a Level 2 inspection before a reline?
Yes, and it’s typically required before any liner work or home sale. A Level 2 camera inspection runs $300 to $550 and gives the technician a full view of the flue interior, which is what determines whether you need resurfacing or replacement. Skipping it means quoting blind. Call (833) 974-6567 to schedule one.
What Happens When You Call
We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. When you call, we’ll ask about your appliance, your flue, and what you’ve noticed – staining, smell, smoke rollout, or a draft that’s gotten worse. From there we book an inspection, document the flue condition in writing, and give you a written estimate with the scope spelled out line by line. No surprises, no vague “it depends” quote.
Sweep. Inspect. Repair. All three. One company. That’s the whole model, and it’s why a homeowner in Hollywood can get from “something’s wrong with my chimney” to a firm number without three different contractors and two weeks of phone tag. Our chimney sweep Hollywood service handles the cleaning side, and the inspection and repair work follow from what we find. If you’re in the Hollywood area and want a straight answer on liner or rebuild costs, we’re the call to make.
Chimney liner and rebuild pricing in Hollywood comes down to flue condition, geometry, and height – and the honest answer is that nobody can quote it accurately without looking. That’s why every estimate we give starts with an inspection and ends with a written scope. We work with DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield because those are the materials that hold up, and we’ll tell you when resurfacing will do the job instead of a full reline. Call (833) 974-6567 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Hollywood.
Pricing reflects the Hollywood market as of 2026. Chimney Sweep Hollywood offers free estimates – call (833) 974-6567.
What Our Customers Say
"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Michael Sullivan"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
- Andre Boyd"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Bryce Kowalski