Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Hollywood?
Chimney cap and crown work in Hollywood typically runs $285 to $650 for a standard cap and crown repair, with a full crown rebuild landing between $750 and $1,600. A simple single-flue cap install usually costs $185 to $340, while a multi-flue cap for a larger chimney runs $380 to $720. The written estimate sets the final price, and estimates here are free.
Those numbers cover real materials from lines we actually install – Gelco and Famco caps, not the generic stamped covers from a big-box shelf. If your flue has softened mortar at the crown, the repair often costs more than the cap itself, and that’s where an honest inspection saves you money.
Key Takeaways
- Standard cap and crown repair: $285 to $650
- Full crown rebuild with new mortar: $750 to $1,600
- Single-flue cap install: $185 to $340
- Multi-flue cap install: $380 to $720
- A cap is the first line of defense against water and animal intrusion – skipping it costs far more later
- We document condition in writing, which helps at insurance renewal or a home sale
Chimney Cap & Crown Cost Breakdown (2026)
Here’s how the pricing breaks down line by line for the Hollywood market. Ranges reflect typical residential chimneys with standard access. A steep roof, a tall stack, or a flue that needs extra prep work moves the number toward the top of the range.
| Line Item | Typical Range | What It Covers |
|---|---|---|
| Single-flue cap (Gelco/Famco) | $185 – $340 | Standard stainless or galvanized cap, sized and fitted to the flue |
| Multi-flue cap | $380 – $720 | Larger footprint cap for a chimney with two or more flues |
| Custom or oversized cap | $450 – $900 | Non-standard sizing, unusual flue configuration, or specialty finish |
| Crown repair (minor cracks, patch and seal) | $285 – $550 | Sealing hairline cracks and resealing the crown edge |
| Full crown rebuild | $750 – $1,600 | Removing failed mortar, reforming the crown, and finishing the slope |
| Crown rebuild with flue tile repair | $900 – $1,850 | Rebuild plus work on the top flue tile |
| Cap and crown combined | $450 – $1,100 | Most common full job – both problems addressed in one visit |
What drives the number up? Access and condition. A low-pitch roof with easy ladder placement keeps labor down. A steep or high roof adds time and care. Cracked mortar with loosened flue tiles pushes a simple repair into a rebuild. A failed crown that has already let water into the flue structure can edge toward the top of the range, because the repair now includes protecting what’s underneath.
What pulls it down? A cap install on a sound crown is the cheapest job on this page. If you catch a hairline crack early, patching and sealing costs a fraction of a rebuild. That’s why we inspect before we quote – there’s no point rebuilding a crown that just needs a seal, and no point sealing one that’s about to fail.
What Affects Chimney Cap & Crown Pricing in Hollywood
- Roof pitch and height. A steeper roof means slower, more careful work and sometimes extra setup. It’s one of the biggest single factors in what a Hollywood job costs, because South Florida roofs often have complex pitches and tight clearances.
- Cap material and size. A standard Gelco or Famco cap sized to one flue sits at the low end. A custom footprint, multi-flue coverage, or a specialty finish moves up. We name the brands we use because the materials matter as much as the labor, and a cheap cap that rusts in two seasons isn’t a saving.
- Crown condition. Hairline cracks can be sealed. A crown that’s crumbling, pulling away, or missing its slope needs a rebuild. That distinction alone can swing a job from a few hundred dollars to well over a thousand.
- Flue tile condition. If the top tile is cracked or spalling, the crown work usually includes addressing it. Left alone, a broken top tile funnels water straight down the flue.
- Local weather exposure. Hollywood’s rainy season dumps water hard and fast, and the sun bakes the mortar between storms. A crown that slopes correctly and a cap that’s properly sized are what keep that cycle from working its way into the masonry year after year.
- Access and chimney configuration. Offset flues, unusual stack layouts, or a chimney that’s hard to reach all add time. We work with the full range of configurations, which means we quote honestly rather than turning a tricky job into a surprise.
How to Save on Chimney Cap & Crown
Saving here isn’t about cutting corners on materials. It’s about timing and scope.
- Catch cracks early. A hairline crown crack sealed now costs far less than a rebuild later. Rainwater works into those cracks, the mortar softens, and the job grows. A sweep and inspection before the rainy season is the cheapest insurance you’ll buy.
- Combine the job. If you need a cap and a crown repair, doing both in one visit saves on setup and access. The combined range is lower than two separate appointments.
- Ask about resurfacing vs. replacement. This is about your flue, but it’s part of the same conversation. HeatShield ceramic resurfacing can restore a damaged flue without a full liner replacement, and it’s an option many companies can’t offer. We’ll tell you honestly which one you actually need rather than pushing the bigger job.
- Get a written inspection first. Documented condition tells you exactly what’s wrong before anyone touches the roof. You know what you’re paying for and why.
- Get a free estimate. The estimate costs nothing and the price is set per job in writing. Call (833) 974-6567 for a free estimate and we’ll lay out the options.
Which Caps and Crowns Do We Use in Hollywood?
We install Gelco and Famco chimney caps and venting covers – the two leading brands in moisture and animal exclusion. That’s not a sticker on a generic cover. A properly fitted cap keeps rain, birds, squirrels, and raccoons out of the flue, and it does it with a screen and frame that hold up to summer heat and heavy rain. On the supply side, we draw on Olympia Chimney and Copperfield product lines, the professional-grade sources that trades rely on.
For crown work, we rebuild and reseal to protect the masonry at the top of the stack. The crown is the sloped cap of mortar at the chimney’s peak that sheds water away from the flue. When it cracks, water runs straight down. A cap handles the opening from above; a sound crown handles the top of the structure around it. Both matter, and neither is decorative.
One more thing worth knowing: a bad cap does more damage than no cap. A loose or undersized cover lets rain through the gap, traps moisture, and can rust out in a season. We size every cap to the flue and fit it so it actually seals.
Why Moisture and Animal Protection Matter in Hollywood
If you’ve ever pulled a bird’s nest out of a flue or seen a crown laid open by a crack, you know why this page exists. A cap is not optional – it’s the first line of defense against moisture damage and animal intrusion. In Hollywood’s rainy season, an uncapped flue takes water directly down the chimney. That water softens mortar, rusts a damper assembly over time, and works into the structure. A cracked crown does the same thing from a different angle.
The fix is straightforward: cap the flue, seal or rebuild the crown, and keep the two working together. What makes it worth doing right is what happens on the inside – the flue, the firebox, and the smoke path. That’s why we treat cap and crown work as part of the whole system, not a rooftop add-on. Sweep. Inspect. Repair. All three, one company, so nobody hands you off to a second crew.
When Should You Repair vs. Rebuild a Crown in Hollywood?
Repair if the crown is intact but has hairline cracks or a slightly worn edge – sealing keeps it watertight for a fraction of a rebuild. Rebuild if the mortar is crumbling, the crown has pulled away from the flue, or it has lost its slope so water pools instead of running off. The crossover point is honest judgment: a patch that will fail again next season isn’t a saving. We inspect, document the condition in writing, and recommend the choice that holds up, not the one that pads the invoice. If a rebuild is genuinely the right call, we say so, and we price it clearly.
What Should You Do About the Flue While the Chimney Is Open?
When we’re already on the roof working the cap and crown, it’s a good time to check the flue. A cracked or softened flue lining is often the hidden problem behind water damage reports. HeatShield resurfacing can save you the cost of a full reline – we’ll tell you honestly which one you actually need. For complex or offset flues, DuraFlex flexible liner systems let us reline configurations that rigid systems can’t navigate, and we’re authorized to source and install DuraFlex. Having the full sweep-inspect-repair cycle under one company means no referrals and no second appointment with a different crew.
How We Handle a Cap and Crown Job
The visit starts with a careful look at the chimney from the roof and inside the flue. We check the cap, the crown, the top flue tile, and the smoke path. If a cap is missing or failing, we recommend a properly sized Gelco or Famco unit. If the crown is cracked, we decide between sealing and rebuilding based on condition, and we quote it in writing. Materials are professional-grade. The work is done by technicians who have up to 8 years of experience handling exactly this kind of repair.
When we’re done, you get documentation of what we found and what we fixed. That written record helps at insurance renewal, during a home sale, or just for your own peace of mind about how the chimney is set up. For owners in Hollywood, that’s the difference between a quick patch and a repair you can stand behind.
How Do I Get a Free Estimate?
Call us at (833) 974-6567. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. Estimates are free and the price is set per job in writing, so you’ll know exactly what the cap and crown work costs before anyone gets on the roof. Whether you need a single capped flue, a crown rebuild, or both, we’ll inspect, quote honestly, and do the work with materials we actually stand behind. For the full range of what we do, see chimney sweep Hollywood.
FAQs – Chimney Cap & Crown Cost
How much does a chimney cap cost in Hollywood?
A single-flue chimney cap in Hollywood typically costs $185 to $340 installed. Multi-flue caps run $380 to $720, and custom or oversized caps cost $450 to $900. Call (833) 974-6567 for an exact quote – estimates are free.
How much does a chimney crown repair cost?
A crown repair (patching and sealing hairline cracks) typically runs $285 to $550, while a full crown rebuild costs $750 to $1,600. The condition of the mortar decides which one you need. Call (833) 974-6567 for a free written estimate.
Is it cheaper to repair or rebuild a chimney crown?
Repair is cheaper when the crown is intact but cracked – $285 to $550 versus $750 to $1,600 for a rebuild. But a crown that’s crumbling or has lost its slope will fail again if patched, so a rebuild is the better value in that case. We inspect first and tell you honestly which side of the line you’re on.
Can you install a cap and fix the crown in one visit?
Yes. A combined cap and crown job typically costs $450 to $1,100 and is done in one visit, which saves on setup and access compared with two separate appointments. Call (833) 974-6567 to schedule a free estimate.
How much does it cost to fix a chimney crown that’s letting water in?
Expect $285 to $1,600 depending on whether it’s a seal, a rebuild, or a rebuild with top-tile repair. Water coming down the flue during Hollywood’s rainy season is usually a crown or cap problem. We answer 24/7 and dispatch from 7am to 7pm, Sunday through Friday, so you can get a free estimate quickly. Call (833) 974-6567.
Pricing reflects the Hollywood market as of 2026. Chimney Sweep Hollywood offers free estimates – call (833) 974-6567.
Written by the team at Chimney Sweep Hollywood.
What Our Customers Say
"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Michael Sullivan"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
- Andre Boyd"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Bryce Kowalski