Gas fireplace service
Sweep & inspection
Caps & crowns
Flue relining
Masonry repairLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fireplace Services Cost in Hollywood?
Fireplace services in Hollywood typically run $189 to $475 for a standard sweep and inspection, while repairs like a new cap or damper fall in the $250 to $650 range. A full stainless liner installation is the big-ticket item, usually $2,400 to $5,800, though HeatShield resurfacing can bring a damaged flue back to service for far less. Every job here is priced per job by a written estimate, and that estimate is free.
Those ranges hold for wood-burning fireplaces, gas inserts, and freestanding stoves. What moves the number is the condition of the flue, the type of appliance, and whether the chimney needs structural work before anything else can be done. We name the brands we use – DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield – because the materials matter as much as the labor, and off-brand parts change the math in ways that show up a few years later.
Key Takeaways
- A routine chimney sweep in Hollywood usually costs $189 to $279.
- A documented inspection with a written report runs $150 to $350.
- Chimney caps (Gelco and Famco) land around $250 to $550 installed.
- HeatShield flue resurfacing is often $1,100 to $2,200 – a fraction of a full reline.
- DuraFlex liner installation runs $2,400 to $5,800 depending on flue length, shape, and offsets.
- Our technicians have up to 8 years of experience, and we handle sweep, inspection, and repair under one company.
Fireplace Services Cost Breakdown (2026)
Hollywood homes run mostly on wood-burning masonry fireplaces and factory-built units, with a growing share of gas inserts and freestanding stoves. Each one prices differently because each one needs a different level of attention. Here’s how the numbers break down for the Hollywood market in 2026.
| Service | Typical 2026 Range | What It Covers |
|---|---|---|
| Standard chimney sweep (wood-burning) | $189 – $279 | Creosote removal, firebox cleaning, smoke chamber brush-down |
| Gas insert or stove service | $165 – $245 | Venting check, component cleaning, combustion verification |
| Level 1 inspection | $150 – $225 | Visual check of readily accessible portions, written report |
| Level 2 inspection | $275 – $450 | Camera-assisted flue review, used for home sales and after a chimney fire |
| Chimney cap install (Gelco or Famco) | $250 – $550 | Custom or stock cap, moisture and animal exclusion |
| Damper repair or replacement | $285 – $650 | Top-seal or throat damper, hardware, sealing |
| HeatShield flue resurfacing | $1,100 – $2,200 | Ceramic resurfacing of a damaged but structurally sound flue |
| DuraFlex flexible liner installation | $2,400 – $5,800 | Full-length stainless liner, insulation, cap, and connection |
| Crown repair or rebuild | $450 – $1,400 | Crack sealing up to partial crown rebuild |
| Masonry repointing (limited scope) | $600 – $2,100 | Mortar joint repair on the chimney exterior |
Two things push the price up more than anything else: flue geometry and undiscovered damage. A straight, round, accessible flue is the easy case. An older chimney with an offset, a rectangular clay tile flue, or a prior liner that was never sized correctly takes more time and more material – and that’s exactly where a flexible system like DuraFlex earns its keep, because it navigates configurations a rigid liner can’t reach.
The other driver is what we find once the flue is clean and lit. Creosote glaze, cracked tiles, a failed crown, or a missing cap all turn a sweep into a repair. We document what we see in writing before quoting so there are no surprises halfway through the job.
What Affects Fireplace Services Pricing in Hollywood
- Appliance type. A wood-burning masonry fireplace needs full creosote removal and a firebox cleaning. A gas insert needs venting verification and component service. A freestanding stove sits somewhere in between, and each one prices on its own schedule.
- Flue condition and geometry. A round, straight flue with a clean interior is the least expensive to service. Offset, rectangular, or previously damaged flues require camera inspection and often flexible liner solutions. DuraFlex is our go-to for those configurations.
- Access and roofline. Hollywood homes range from single-story ranches to two-story properties with steep pitches and screened enclosures. Chimney access from the roof line affects labor, especially when a cap install requires custom fitting.
- Whether resurfacing can replace a reline. HeatShield ceramic resurfacing restores a damaged flue from the inside when the structure is still sound. It typically costs a third to half of a full liner replacement, so we check for it first and tell you honestly which one you actually need.
- Cap condition. A missing or damaged cap is the most common cause of chimney water damage in South Florida. Gelco and Famco caps are our two standard solutions, and getting one on early prevents a much larger repair later.
- Burning season timing. Demand climbs as cooling rains ease and homeowners start lighting fires again in late fall. Scheduling a sweep before that spike usually means a faster appointment and an easier estimate walk-through.
How Does Fireplace Sweeping Work, and What Does It Cost?
A standard fireplace sweep in Hollywood usually costs $189 to $279 and takes about an hour for a wood-burning unit. We arrive with drop cloths and a HEPA vacuum, remove creosote from the flue and smoke chamber, clear the firebox and damper area, and leave the room as clean as we found it. Gas inserts and stoves get a similar visit focused on venting and component condition.
What we check during that hour matters as much as the brushing. Cracked flue tiles, a stuck damper, crumbling mortar at the smoke shelf, and creosote glaze on the upper flue are all things that only show up with a proper cleaning and a light. When we spot them, we document them and quote the repair – we don’t fold it into the sweep bill without telling you first.
How often you need a sweep depends on how much you burn. A household that lights the fireplace a few evenings a week through the winter benefits from an annual visit. A household that burns occasionally can stretch to two years between sweeps, but the annual inspection still matters – a clean flue and a sound flue aren’t the same thing. If you’d like the full picture of how we handle the sweep side of things, take a look at chimney sweep hollywood.
How Does Chimney Inspection Pricing Work?
Chimney inspections in Hollywood run $150 to $225 for a Level 1 visual check and $275 to $450 for a Level 2 with camera assistance. A Level 1 covers readily accessible portions of the chimney – firebox, damper, visible flue, exterior condition. A Level 2 adds video review of the full flue interior and is what’s called for after a chimney fire, during a home sale, or when you’re changing the appliance type.
Every inspection we perform ends with a written report describing flue condition, cap and crown status, and any repair or safety items. That document has real weight: it’s something you can hand an insurer at renewal, attach to a real-estate disclosure, or keep on file for warranty purposes. It’s also useful for you – a plain-language record of exactly what was found and when.
If the inspection turns up a problem, we quote it right there. Sweep, inspect, and repair are all handled by the same company and the same crew, so there’s no second appointment with a different team and no handoff to a contractor who has never seen the chimney.
How Much Does a New Chimney Liner Cost in Hollywood?
A full chimney liner installation in Hollywood typically costs $2,400 to $5,800. Where you land in that range depends on flue length, interior shape, whether insulation is required to meet clearance, and whether the existing flue needs to be adapted before a new liner can go in. A single-story straight flue is the low end; a two-story offset flue with a rectangular clay tile interior is the high end.
We use DuraFlex flexible liner systems for the majority of installs because they can navigate offsets and irregular flues that rigid liners can’t. When a damaged flue still has intact structure, HeatShield ceramic resurfacing can often restore it without a full reline at all. That option runs roughly $1,100 to $2,200 – a meaningful saving and a real solution, not a band-aid. We’ll tell you honestly which of the two you actually need instead of defaulting to the more expensive one.
The liner job itself includes the liner, insulation where needed, a new top plate, a cap, and the appliance connection. It’s a single project, not a series of piecework charges, and the written estimate you receive before work starts is the price you pay.
What Does Chimney Cap and Water Damage Repair Cost?
A new chimney cap installed in Hollywood runs $250 to $550, and it’s the single most cost-effective thing a homeowner can do for a masonry chimney. A cap is not optional – it’s the first line of defense against moisture damage and animal intrusion. Without one, rain enters the flue, mortar softens, tiles crack, and the eventual repair bill dwarfs what the cap would have cost. We stock and install Gelco and Famco caps, the two leading brands in moisture and animal exclusion.
If water has already gotten in, the repair price depends on how far the damage reached. Crown cracks and spalling brick at the top of the chimney typically price in the $450 to $1,400 range for a partial rebuild, and limited masonry repointing is generally $600 to $2,100 depending on linear footage. Catching it at the crown stage keeps the work smaller and the bill lower.
How to Save on Fireplace Services in Hollywood
Fireplace costs aren’t fixed. A few practical habits keep the annual number down without skipping anything important.
- Get the cap installed before the flue needs repair. A $250 to $550 cap protects against the $1,400 crown rebuild that follows years of unprotected rain. That’s the best return on anything a homeowner can do for a masonry chimney.
- Ask about resurfacing before you accept a reline quote. If a contractor jumps straight to a full liner, ask whether HeatShield resurfacing applies. It’s not right for every flue, but when it is, it saves real money.
- Schedule the sweep before burning season picks up. Getting ahead of the late-fall rush means an easier appointment and a cleaner walk-through of what needs doing.
- Bundle the sweep and inspection in one visit. Sweeping and inspecting at the same time costs less than two separate calls and gives you a fuller picture of the system in one go.
- Keep the written inspection report. A documented history of the chimney makes future service faster and easier to quote, and it’s valuable at resale or insurance renewal.
- Use free estimates. There’s no cost to get a written number before any work starts. Call (833) 974-6567 and we’ll walk you through what your chimney needs and what it will cost.
Same-Day Fireplace Service in Hollywood
When a firebox is smoking into the room, a damper won’t close, or a home sale is closing this week, some jobs can’t wait for a scheduled visit. We offer same-day service where the schedule allows. Fast dispatch runs from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. We answer 24/7, so a call that comes in outside dispatch hours gets booked into the next opening.
Same-day work is priced the same as scheduled work – per job, by the written estimate, with no premium attached. The urgency changes the timing, not the price.
Why Material Choice Shapes the Final Price
Two quotes for the same liner job can differ by a thousand dollars, and the difference is usually the material. Off-brand liners and caps that look similar on paper can vary a great deal in alloy composition, wall thickness, and sealing performance. We work with six named professional product lines – DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield – because those are the materials the trade itself relies on for long-term performance. Olympia Chimney and Copperfield are the preferred suppliers of professional chimney trades across North America, and that’s not a marketing line; it’s what shows up when a liner is still holding up years down the road.
The quote reflects the brand. A cheaper quote for a no-name liner isn’t the same product, and it won’t perform the same way. If you want to understand what the materials actually do, see our full range of fireplace services and let us show you the spec before you decide.
FAQs – Fireplace Services Cost in Hollywood
How much does a chimney sweep cost in Hollywood, FL?
A chimney sweep in Hollywood typically costs $189 to $279 for a standard wood-burning fireplace. Gas inserts and stoves run $165 to $245 because they need venting and component checks rather than creosote removal. Call (833) 974-6567 for an exact quote – estimates are free.
Is it cheaper to repair or replace a chimney liner?
Repairing with HeatShield resurfacing is usually cheaper than replacing, running $1,100 to $2,200 versus $2,400 to $5,800 for a full liner. It only works when the flue structure is still intact. We inspect first and quote both options honestly. Call (833) 974-6567 to get both numbers in writing.
How much does a chimney cap cost in Hollywood?
A new chimney cap installed in Hollywood costs $250 to $550, depending on whether the cap is stock or custom. Gelco and Famco are our two standard brands. Call (833) 974-6567 for a free measure and quote.
Can you come today for a fireplace problem?
We offer same-day service when the schedule allows. Fast dispatch runs 7am to 7pm, Sunday through Friday. Call (833) 974-6567 – we answer 24/7 – and we’ll book you into the next available opening.
Do I need a Level 1 or Level 2 inspection?
Level 1 inspections run $150 to $225 and cover an annual check of accessible parts. Level 2 inspections run $275 to $450 and add camera review of the full flue, needed for home sales, after a chimney fire, or when changing the appliance. Call (833) 974-6567 and we’ll tell you which one your situation calls for.
Get a Free Estimate on Fireplace Services in Hollywood
Whether your chimney needs a routine sweep before the season starts, a documented inspection for an insurer or a buyer, or a repair that’s been put off too long, we handle all three under one company – sweep, inspect, and repair, same crew, no handoffs. Our technicians have up to 8 years of experience with wood-burning fireplaces, gas inserts, and stoves across Hollywood. Call (833) 974-6567 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. You can also learn more about our Hollywood service area and what we cover.
Pricing reflects the Hollywood market as of 2026. Chimney Sweep Hollywood offers free estimates – call (833) 974-6567.
Written by the team at Chimney Sweep Hollywood.
What Our Customers Say
"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Michael Sullivan"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
- Andre Boyd"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Bryce Kowalski